For any ship repairs, technical engineering, automation, hydraulics, spare parts and safety equipment services, do not hesitate to contact PMS S.A. that will act in 24/7 basis!
We remain at your disposal for any information you may require.
Read the newsletter "WORKSHOP AT PANAMA |NEW COLLABORATION FOR REPAIRS " in pdf format.
]]>
We are pleased to inform you that PMS S.A. provides highly qualified FLYING TEAMS from Greece at short notice and competitive prices. Our Greek technicians undertake general repairs at sea, including fitting and welding, as well as the following:
REPAIRS AT SEA
Our repair team is dedicated to fulfilling the needs of customers, providing support to all types of vessels WORLDWIDE, minimizing time at shipyards.
We remain at your disposal for any information you may require.
Read the newsletter "FLYING TEAMS" in pdf format.
]]>
We are very pleased to announce that PMS S.A. has recently completed CRANKSHAFT REPLACEMENT AT SEA. Our flying team accomplished the replacement at a bulk carrier vessel of a D/G CME MAN 5L16/24, during her voyage from East Coast to Mediterranean.
PMS S.A. provides full technical support solutions for Marine Diesel Engine repairs. Our Service Team consists of highly experienced professionals who are ready to travel anywhere in the world in order to assist your company at short notice and at competitive prices.
We remain at your disposal for any further information and would be very pleased to assist you with any requirements you may have.
Read the newsletter "CRANKSHAFT REPLACEMENT AT SEA" in pdf format.
]]>
We are very pleased to announce that PMS S.A. has recently completed CRANKSHAFT REPLACEMENT AT SEA. Our flying team accomplished the replacement at a container vessel of a MAK diesel generator, Type 9M20, 1500kw, in only 10 days!
PMS S.A. provides full technical support solutions for Marine Diesel Engine repairs. Our Service Team consists of highly experienced professionals who are ready to travel anywhere in the world in order to assist your company at short notice and at competitive prices.
We remain at your disposal for any further information and would be very pleased to assist you with any requirements you may have.
Read the newsletter "CRANKSHAFT REPLACEMENT AT SEA" in pdf format.
]]>
We are pleased to announce that our team has recently conducted in Piraeus region repair of steering gear and rudder blade after grounding!
PMS S.A. can offer quality repairs with reasonable prices and within a limited time frame, in order to accommodate the needs of your charter party.
Our Service Team consists of highly experienced professionals who are dedicated and specialized in above works. They are ready to travel anywhere in the world in order to assist your company at a short notice and at a low cost.
We remain at your disposal for any information you may require.
Read the newsletter "REPAIR OF STEERING GEAR AND RUDDER BLADE (AFTER GROUNDING)" in pdf format.
]]>
Piraeus Marine Services S.A. would like to introduce you advanced FIRE SAFETY PRODUCTS and SOLUTIONS focusing on premium quality and high technology, performance and innovation in order to preserve and protect your good vessels!
MPACT (MARINE PIPE AND CABLE TRANSIT) is the fastest system to install for watertight divisions. It consists of a fibrous filler packing and watertight sealant and is proposed as an alternate to rubber filler sleeves and silicone sealant. The steel sleeves are supplied by the Shipyards.
ADVANTAGES:
• Sleeve length can be reduced by 25%.
• Less Sealant than competitive systems (35% reduction).
• Shelf-life advantages (18 months vs 6 months).
• Lower VOC Content | More environmentally friendly
• Two-component system: simplify installation and logistics!
Please do not hesitate to contact us as we would be pleased to assist you with any requirement you may have.
Read the newsletter 'MARINE FIRESTOP' in PDF format.
]]>
As fuel is going up high in the sky nowadays, shipping companies tend to protect their good vessels and their expenses! Thus we would like to introduce you the most convenient solution to your problem: Installation of Doll-Fin & Eco-Rudder, two brand new energy devices!
PMS S.A. is the exclusive agent in Greece of the Korean Company DAECHUN INDUSTRIAL CO. LTD., global suppliers in Offshore & Shipbuilding, who run business since 1981. For the last 30 years, the company has spearheaded shipbuilding and offshore based on its commitment to reliability and pioneership.
The purpose of these devices is the reduction of the fuel consumption in combination with money saving, compared to other devices.
Below you can see the comparison between Doll-Fin & Eco-Rudder and Mewis Duct. It is obvious that the cost of the installation is much lower in these devices than the Mewis Duct device.
All shipping companies should be prepared for the future! We are ready and well prepared to assist you, using also a primary study, if you intend to install these units.
Please do not hesitate to contact us as we would be pleased to assist you with any requirement you may have.
Read the newsletter "ENERGY SAVING DEVICES | DOLL-FIN & ECO-RUDDER" in pdf format.
]]>
We are pleased to inform you that PIRAEUS MARINE SERVICES S.A. is in close collaboration with a company that is pioneer in providing environmental services to public and private entities, ships and industries, with the objective of enabling environmental control and management of all categories of waste, including IHM services.
Since ship owners are responsible for updating and maintaining the IHM records of their ships throughout the life cycle of each vessel, our partners are able to take care of each vessels’ IHM maintenance.
Please do not hesitate to contact us as we would be pleased to assist you with any requirement you may have.
Read the newsletter "MAINTENANCE OF INVENTORY OF HAZARDOUS MATERIAL | IHM" in pdf format.
]]>
We are pleased to inform you that PIRAEUS MARINE SERVICES S.A. is in close collaboration with an international team of reputable, dedicated and knowledgeable China Marine Surveyors, proud of delivering high quality survey services to the global shipping and chartering market. We can provide you with a network of strategically located surveyors with continuity of service from one place to the next. Their reputation is founded upon delivering and excellent, flexible, value added service 24 hours a day, 7 days a week and 365 days a year.
Our highly experienced and professionally qualified surveyors/adjusters can assure clients of prompt, efficient services in the best professional manner in keen areas of expertise including:
MARINE SURVEY IN CHINA
TECHNICAL SERVICES IN CHINA
Please do not hesitate to contact us as we would be pleased to assist you with any requirement you may have.
Read the newsletter "CHINA MARINE SURVEYORS" in pdf format.
]]>
We are pleased to inform you that we have available in Piraeus stock for sale 1 SET CON ROD BEARING UNDERSIZED 1.5MM and 1 SET CON ROD BEARING UNDERSIZED 2.0MM – GENUINE PARTS - for Wartsila L20, in a very competitive price.
Please do not hesitate to contact us as we would be pleased to assist you with any requirement you may have.
Read the newsletter "WARTSILA L20 UNDERSIZED CON ROD BEARINGS" in pdf format.
]]>
We are pleased to inform you that PIRAEUS MARINE SERVICES S.A. is in close collaboration with a company that is pioneer in providing environmental services to public and private entities, ships and industries, with the objective of enabling environmental control and management of all categories of waste, including IHM services.
In view of an increased concern about various environmental issues, the focus on the use of hazardous materials in ship design, building and operation is also increasing. Inventory of Hazardous Materials (IHM) is a detailed document including all hazardous substances on board a vessel. It is developed in order to reassure a healthy and safe environment, which is really important for maritime operation.
Please do not hesitate to contact us as we would be pleased to assist you with any requirement you may have.
Read the newsletter "INVENTORY OF HAZARDOUS MATERIAL | IHM" in pdf format.
]]>
We are pleased to inform you that we have available in Piraeus stock for sale 2 reconditioned GENUINE Cylinder Heads for Wartsila L20 series, in a very competitive price.
Original spare parts have been used for the overhaul of the cylinder heads.
If you proceed with complete order (2 pieces), we can provide discount on our price.
Please do not hesitate to contact us as we would be pleased to assist you with any requirement you may have.
Read the newsletter "CYLINDER HEADS WARTSILA L20" in pdf format.
]]>We are pleased to inform you that for the below types of Behrens pumps we can offer based on our samples with very short delivery time approx. 3-4 w/days:
VRF 8/320G
VRF 5/350G
VRF 7/290G
VRW 5/420G
VRW 3/350G
Also note that day by day we get new samples for Behrens pumps and we expand our range! Please find attached photos from new arrivals of pumps types: VRF 5/350G and VRW 7/290G.
Please do not hesitate to contact us as we would be pleased to assist you with any requirement you may have.
Read the newsletter "BEHRENS PUMPS" in pdf format.
]]>
We would like to inform you that JIANSU ZHENHUA ENVIRONMENTAL PROTECTION TECHNOLOGY CO. LTD. (ZEPT) that PMS S.A. represents exclusively in Greece, accomplished one more success!
On 4 August 2020, the Exhaust Gas Cleaning System (EGCS) installation by Jiangsu Zhenhua Environmental Technology Co., LTD. (ZEPT) for Greece CSL’s "MSC BOSPHORUS" completed a successful sea trial and delivery with the witness of shipowner and RINA Class’ representatives.
“MSC BOSPHORUS” is the 2nd vessel for CSL to install our ZEPT’s EGCS with Hybrid model. With the teamwork and careful guidance of the ZEPT’s technology team, the entire sea trial & commissioning operation of EGCS has been successfully completed within one day. All the technical data and conclusion meet the design requirements and have been well received and recognized by the RINA Class surveyor and the shipowner’s representative.
PMS S.A. is ready to assist your company at short notice and at competitive prices.
Please feel free to contact us as we would be pleased to assist you with any requirement you may have.
We remain at your disposal for any information you may require.
Read the newsletter "ZEPT HYBRID-LOOP OF EGCS SUCCESSFULLY DELIVERED AGAIN" in pdf format.
]]>Under the new global limit, on 1 January 2020, ships will have to use fuel oil on board with a sulphur content of no more than 0.5% against the current limit of 3.5%. Vessels will need to clean their tanks in order to be able to use low sulphur fuels.
Remains Removal of Fuel or Other Wastes from the Tank
PMS S.A. is ready to assist your company at short notice and at competitive prices, all around the world, by using flying teams or locals. Please feel free to contact us as we would be pleased to assist you with any requirement you may have.
We remain at your disposal for any information you may require.
Read the newsletter "TANK CLEANING FOR LOW SULPHUR FUELS" in pdf format.
]]>
As from 01.01.2020 the IMO agreed to lower the existing Annex VI global cap from 3.5% to 0,5%. Now is the time to protect your vessel’s engines from the remaining cat fins.
European filters 10 micron, available now for all types of Main & Auxiliary Engines.
PMS S.A. is ready to assist your company at short notice and at competitive prices.
Please feel free to contact us as we would be pleased to assist you with any requirement you may have.
We remain at your disposal for any information you may require.
Read the newsletter "FILTERS FOR LOW SULPHUR FUELS" in pdf format.
]]>
PMS S.A. is exclusive agent for Greece of the South Africa-based company VESCONITE, who manufacture a proprietary brand of self-lubricated polymer bushings and wear plates that operate in dusty, dirty or wet conditions and still last longer than other products on the market.
These products do not require greasing, which fits in with the company’s ‘Zero Maintenance’ mantra. 80% of steel and bronze bushing applications can be replaced with Vesconite, which has up to ten times the wear life of competing products.
While Vesconite is the company’s best-known product range, the new Vesconite Hilube range is important for customers who want the longest life and best performance possible, and is in particular demand by overseas customers. The company also produces standard polymers like nylon and polyethylene rods, bushings and plates.
Vesconite Bearings has warehouses in Johannesburg, Texas, the UK, the Netherlands and New Zealand, with stocking distributors in Argentina, Australia and Singapore, but production takes place in Virginia in the Free State province of South Africa. The company provides extensive machining services. It has the largest machine shop in the Free State, with over 80 computer numerically controlled lathes and machining centers, and large conventional lathes that are capable of machining bushings up to 3 000 mm in diameter.
Vesconite Bearings is an ISO 9001:2015 accredited company and currently employs 100 staff members, 25 of whom are employed in the sales and administration divisions, with 50 in manufacturing. The company also focuses significantly on training and skills development, and is currently mentoring 25 young people as part of its learnership and apprenticeship programs.
For more information regarding VESCONITE, please visit their website or download here their Presentation Script.
You can also download here their VESCONITE HILUBE products brochure, an Exceptional Bearing Material, for your reference.
Please do not hesitate to contact us as we would be pleased to assist you with any requirement you may have.
]]>PMS S.A. is exclusive agent for Greece of the Chinese Company JIANSU ZHENHUA ENVIRONMENTAL PROTECTION TECHNOLOGY CO. LTD. (ZEPT), which is located in the provincial economic development zone of Jiangyan district, Taizhou city. It belongs to Jiangsu Zhenhua Pump Manufacturing Co. Ltd. with more than 60 years of experience in supporting the marine industry.
ZEPT is a high-tech enterprise integrating scientific R&D, production, operation and service of Marine equipment. The main business of ZEPT is to produce marine environmental protection equipment, relying on the existing platform of the parent company. Their business philosophy of innovation and development adhere to the market-oriented, quality for survival and create value for customers, win-win development for the purpose.
For more information regarding ZEPT CO. LTD., please visit their website.
Read the newsletter "SCRUBBER SYSTEMS BY ZEPT" in pdf format.
]]>This small but really efficient shipyard can accommodate vessels up to 14.000DWT or L=155m and B=22.8m. Whenever you plan to drydock your vessel, please do not hesitate to ask us for a quotation.
We remain at your disposal for any further information and would be very pleased to assist you with any requirements you may have.
Read the newsletter "DRYDOCKING IN TEREM SHIPYARD" in pdf format.
]]>
CLASS CCS CERTIFICATE and DRAWING are available.
(Download drawing here.)
Please do not hesitate to contact us as we would be pleased to assist you with any requirement you may have.
Read the newsletter "CYLINDER LINERS FOR MAN B&W S50MC" in pdf format.
]]>
"THE VPG RAPID RESPONSE CLAMP IS 6X FASTER TO REPAIR DAMAGE THAN PREVIOUS SYSTEMS"
We are pleased to inform that PMS S.A. is now an agent of VALLEY PRECISE GLOBAL, experts in temporary repairs for leaks & bursts on vessels & marine systems.
It is quite simply the fastest method to repair a pipe under pressure. The VPG Rapid Response Clamp was engineered to contain leakage from damaged pipework under pressure faster, with less potential for harm to the operator than all competitive systems on the market. Developed originally for use in combat vessels, the Pipe Repair Technology is now available in three variants, from 6.6 Bar to 40 bar.
The VPG Rapid Response Clamp offers reduction in potential environmental damages and reduction of pipe repair cost.
We insist every vessel to have a set of clamps to be used for rapid pipe repair.
A major design advantage is that each clamp covers a wide diameter range. Only 8 different sizes are required to span the standard range 38mm to 930mm. Clamps to suit larger diameters are available on request.
Four standard Clamps widths are available (70, 148, 210, 272mm) and can be used for water, fuel or steam pipes.
For more information, please visit their website or download their brochure and video1 & video 2.
Please do not hesitate to contact us as we would be pleased to assist you with any requirement you may have.
Read the newsletter "RAPID RESPONSE PIPE REPAIR CLAMP BY VPG" in pdf format.
]]>
By unballasting the barge, bridge was lifted in the necessary height in order to be unlocked from each position and, afterwards, it was transported to Salamis Shipyard.
Previously, the bridge was dismantled at site and then transported in pieces.
You may watch relevant video here.
On Monday, 12th November 2018, and after a thorough inspection by the classification society, which led to a few changes regarding the reinforcement of the bridge as well as replacing the deck, the bridge returned to each position in order to serve the residents of Isthmia.
The paint protection guaranty provided is 10 years!
Please do not hesitate to contact us, as we would be pleased to assist you with any requirement you may have.
PMS S.A. is proud to announce a strategic cooperation with Sunbo Industries Co. Ltd. Korea, that are specialized in manufacturing and installations of units for sewage treatments, purifiers, M/E L.O., cooling, supply units for main engine F.O., generator engines F.O., boilers F.O., F.W., central F.W., FGSS, PWTS and Ballast Water management systems.
Due to this cooperation, PMS S.A. is now the exclusive representative in Greece, Cyprus and Bulgaria of their FUEL GAS SUPPLY SYSTEM (FGSS), since they where the world’s first supplier of FGSS in 2014.
PLEASE SEE THE INFORMATION BELOW:
For more information regarding SUNBO INDUSTRIES CO. LTD., please visit their website, where you can also download their brochures.
Please do not hesitate to contact us, as we would be pleased to assist you with any requirement you may have.
Read the newsletter "FGSS: FUEL GAS SUPPLY SYSTEM" in pdf format.
]]>
We are pleased to inform that PMS S.A. is now an agent of ASCENZ SOLUTIONS PTE LTD, a leading provider of vessel performance solutions in the maritime industry. Utilizing shipboard data and analytical tools, Ascenz equips fleet managers with the right management tools for system tracking and key metrics monitoring.
To date, the company has installed more than 1,200 mass flow meters and managed over 400 vessels across the world. Smart shipping is essential for data-driven decision making and Ascenz’ Shipulse Solutions puts that vital shipboard data and analytical tools at your fingertips for optimized performance and efficiency across your fleet.
For more information, please visit their website or download their brochure and video.
You may also download the ‘CORIOLIS MASS FLOW METERS’ brochure and 'TYPICAL ENGINE ROOM MASS FLOW METERS' flyer for more information.
Please do not hesitate to contact us as we would be pleased to assist you with any requirement you may have.
Read the newsletter "CORIOLIS MASS FLOW METERS" in pdf format.
]]>PMS S.A. is exclusive agent for Greece of the Korean Company DAECHUN INDUSTRIAL CO. LTD., global suppliers in Offshore & Shipbuilding, who run business since 1981 and have been manufacturing Multi Core Tube bundles, Stainless Steel Coil Tubes, Straight Tubes, Sheathed Copper Tubes, Pre-Insulation Tubes and supplying both domestic and overseas shipyards for over 25 years (Japanese Shipyards Supply list, On & Offshore List). They have supplied shipyards over 10,000 ship sets with their products across the world by 2014.
Their products are all approved by major Classification Societies, such as ABS, BV, CCS, DNV-GL, KR, LR, NK, RINA, RMRS, certified by ISO 9001, ISO 14001, OHSAS 18001 and registered in Achilles Joint Qualification System.
For more information regarding DAECHUN INDUSTRIAL CO. LTD., please visit their website, where you can also download their brochures.
Have you ever suffered from CORROSION PROBLEMS?
The corrosion of metals and alloys in natural and chlorinated seawater has long presented challenges for Marine & Offshore Industries.
Stainless Steel & Copper tubings are acclaimed for their excellent corrosion resistance and widely used in the field. Nonetheless, they are also susceptible to corrosion attack in the presence of water, oxygen and chloride.
The consequences of tube & fitting corrosion have been a critical problem in worldwide marine and offshore projects and incurs unavoidable both direct & indirect costs.
Fortunately, the problems with tubing corrosion can be simply solved with DAECHUN’s Multi Core Tube and unavoidable corrosion costs can be reclassified as “AVOIDABLE COSTS”!
1. Corrosion Inspection In Tanks
Please do not hesitate to contact us as we would be pleased to assist you with any requirement you may have.
Read the newsletter "TOTAL TUBE SOLUTIONS FOR CORROSION PROBLEMS" in pdf format.
]]>
We would like to inform you that PMS S.A. is in close cooperation with a Service Engineering Team for Cummins, Caterpillar and Deutz Marine Diesel Engines.
They are highly qualified professionals with over 20 years of experience, dedicated and specialized in servicing Cummins, Caterpillar and Deutz Marine Engines.
Our Service Engineers are ready to travel anywhere in the world at short notice to assist your company at low cost.
Please also note that we can provide GENUINE and OEM spare parts with fast delivery.
We remain at your disposal for any information you may require.
Read the newsletter "CUMMINS – CATERPILLAR – DEUTZ | SERVICE ENGINEERS & SPARE PARTS" in pdf format.
]]>
Our team is recognized by all major classification societies for their high standards, using modern diving equipments for underwater bottom cleaning and propeller repair and polishing, including video, report and welding certification.
Kindly notice that our Diving Team differs from the other local divers as they own a service boat with no additional cost, always on call for any issue.
We remain at your disposal for any information you may require.
Find the newsletter "DIVING SERVICES AT CHIOS ISLAND" in pdf format.
]]>
We are now able to supply all the spare parts for EVAC systems (knives, rotors, valves, shaft seals etc) of EVAC 90 – 900 – 910, as well as JETS maintenance parts and commonly used spare parts for pumps and vacuum systems for models JETS 15MB – 25MB – 30MB – 50MB – 64MB in very attractive prices.
We remain at your disposal for any further information and would be very pleased to assist you with any requirements you may have.
Read the newsletter "VACUUM TREATMENT PLANTS" in pdf format.
]]>
More specifically, we replaced the seals in two Bowthrusters of 2000kW each at COSCO TERMINAL in a 368m length CONTAINER VESSEL. All work was achieved for both units in 24 hours.
Following, you may see photos from our work:
Our Service Team, which consists of highly experienced professionals are ready to travel anywhere in the world, every day, around the clock, with low cost, to assist your company at a short notice.
We remain at your disposal for any information you may require.
]]>PMS S.A. and Sunbo Industries, our Korean partners, announced that the BlueZone BWMS has received US Coast Guard Alternative Management System (AMS) acceptance for its full line of ballast water management system (BWMS).AMS certification offers ship owners an additional level of security and assurance that the BlueZone is an efficient system.
Read the newsletter "BlueZone BWMS | AMS Acceptance" in pdf format.
]]>
All the above contribute in saving repair time and money.
We remain at your disposal for any information you may require.
Read the newsletter "New Panama Canal Vessel Requirements|Panama Chocks" in pdf format.
]]>USCG Ballast Water Management (BWM) program update
USCG published a Policy Letter (CG-OES Policy Letter No. 13-01, Revision 1) and an associated Marine Safety Information Bulletin (MSIB 13-15) that provide revised guidance to vessel owners and operators seeking to extend compliance dates for implementing approved ballast water management methods.
The original compliance date of a vessel is determined by the following table, which reflects the implementation schedule as listed in 33 CFR Part 151.1512(b) (Subpart C) or 151.2035(b) (Subpart D).
All new vessels (constructed on or after 1 December 2013) must use an approved ballast water management method on delivery. Existing vessel’s ballast water capacity and is set as the first scheduled drydocking after 1 January 2016 or 1 January 2014.
MSIB 13-15 clarifies the term ‘first scheduled drydocking’ for the purposes of compliance with the BWM implementation schedule. In all cases, a vessel’s first scheduled drydocking date is the date the vessel enters a drydock.
If that happens sometime during 2015 and the vessel goes not leave drydock until after 1 January 2016, this drydocking is not considered the first scheduled after 1 January 2016 for purposes of compliance.
You can also visit the webpage of our BWT Unit, the ‘BlueZone BWMS’, where you may find all the necessary information you need regarding this system, which is based on the use of OZONE MICRO BUBBLES. By that, all harmful aquatic organisms and pathogens in ballast water are disinfected. The micro OZONE bubbles reduce the power consumption substantially. This method is unique and has been patented.
Here you may find all the necessary information regarding the Policy letter (CG-OES Policy Letter No. 13-01, Revision 1), the associated Marine Safety Information Bulletin (MSIB 13-15), as well as the video for the BlueZone BWMS system.
We remain at your disposal for any information you may require.
Read the newsletter "DEVELOPMENTS REGARDING BALLAST WATER MANAGEMENT IN US WATERS" in pdf format.
]]>
23 lengths of anchor chain,
with or without certificate, in Piraeus Greece.
The size of the chain is 73 M.M.
In case of interest, please do not hesitate to contact us.
We will be glad to assist you.
Read the newsletter "Anchor Chain" in pdf format.
]]>
PMS S.A. is proud to announce a strategic cooperation with Sunbo Industries Co. Ltd. Korea, that are specialized in manufacturing and installations of units for sewage treatments, purifiers, M/E L.O., cooling, supply units for main engine F.O., generator engines F.O., boilers F.O., F.W., central F.W., FGSS, PWTS and Ballast Water management systems.
Due to this cooperation, PMS now is the exclusive representative in Greece, Cyprus and Bulgaria of BlueZone, which is a Ballast Water Management System (BWMS) that uses OZONE micro bubbles. By that, all harmful aquatic organisms and pathogens in ballast water are disinfected.
The OZONE micro bubbles reduce the power consumption substantially. This method is unique and has been patented.
Configuration of BlueZone BWMS
The system is very simple to be installed in any space on board the vessel. You only have to guide to ozone droplets by a small 1½ inch pipe. The only modification is to insert on the main ballast line the micro bubble mechanism and the injector nozzle.
Major Equipment of BlueZone BWMS
All the (four) equipments are compact with a height of 2.2m max, having as a result the installation to be done anywhere either in the accommodation or in a container or on a weather deck. Installation can be achieved max in a week at sea or at port.
The merit of Micro Ozone Bubble
BlueZone BWMS Advantages
Easy Maintenance & Installation by One Unit Module
BWMS Type Comparison Table
Below, you may see the advantages of BlueZone BWMS in contrast to other methods that companies use for BWT systems.
Based on a VLCC, 3000 m3 /h x 2 sets of ballast pump capacity.
Certification of BlueZone BWMS
You could find more information about the BlueZone BWMS in the following link:
https://www.youtube.com/watch?v=oJ-Mr717TZY
We remain at your disposal for any information you may require.
Please contact us in order to arrange a meeting for an extensive presentation.
Read the newsletter "BlueZone BWMS - Ozone Micro Bubble" in pdf format
]]>We are pleased to announce that our team has recently repaired a Main Generator of 900 KW at sea. Work was done from port to port. PMS S.A. can provide full technical support solutions for Electrical Generators including Rewinding.
Our Service Team consists of highly experienced professionals who are dedicated and specialized in Rewinding Electrical Motors. They are ready to travel anywhere in the world in order to assist your company at a short notice and at a low cost.
We remain at your disposal for any information you may require.
Read the newsletter "900 KW Electric Generator - Repairing at Sea" in pdf format
]]>REPAIRS AT SEA
Our repair team is dedicated to fulfilling the needs of customers, providing support to all types of vessels WORLDWIDE, minimizing time at shipyards.
We remain at your disposal for any information you may require.
Read the newsletter "Flying Teams - Fitters & Welders " in pdf format
]]>Our team consists of experienced professionals who can perform a wide range of steel works. We also provide Flying Teams, ready to assist your vessel worldwide at short notice and at competitive prices.
We remain at your disposal for any further information and would be very pleased to assist you with any requirements you may have.
Read the newsletter "Heavy Weather Damage Repairs" in pdf format.
]]>PMS S.A. provides full technical support solutions for Marine Diesel Engine repairs. Our Service Team consists of highly experienced professionals who are ready to travel anywhere in the world in order to assist your company at short notice and at competitive prices.
We remain at your disposal for any further information and would be very pleased to assist you with any requirements you may have.
Read the newsletter "Crankshaft Repair - Main Engine Overhaul" in pdf format
]]>The production range covers units from 15 MT to 25 MT per 24 hours.
Cost is relatively competitive in the market, especially low cost of spare parts due to membrane technology.
Please feel free to contact us for any further information regarding OSMOSIS. PMS S.A. is ready to assist your company at short notice and at competitive prices.
We remain at your disposal for any information you may require.
]]>Our Divers Team undertakes the cleaning of:
The hull cleaning machine comprises of 3 units of brushes that retract fully from the hull with a clearance to prevent damage on the paint work coating while removing unwanted fouling efficiently. Propeller polishing is carried out with specialized brush with diamond disc pads, up to standard Rupert Scale “A”.
*Kindly note that our divers’ team performs underwater hull cleaning mainly in Greek waters. However it is possible to arrange hull cleaning in other parts of the world as well.
Please feel free to contact us for any further information as we would be very pleased to assist you with any requirements you may have.
Read the newsletter "Underwater Hull Cleaning" in pdf format.
]]>We are very pleased to announce that our team has recently repaired at sea a Main Generator of 550 KW, which was removed from the Engine and transferred on deck. Repairs were performed in a total of 14 days.
PMS S.A. provides full technical support solutions for Electrical Generators such as Rewinding. Our Service Team includes highly experienced professionals who are specialized in Rewinding Electrical Motors. They are ready to travel anywhere in the world in order to assist your company at a short notice and at a low cost.
We remain at your disposal for any further information and would be very pleased to assist you with any requirements you may have.
We remain at your disposal for any information you may require.
Read the newsletter "Repairs at Sea - 550 KW Main Generator / Rewinding" in pdf format.
]]>
We would like to inform you that Piraeus Marine Services S.A. provides MULTIMETALL Polymer Metals in cooperation with Marilia Co.
If you are experiencing problems with leaking pipes and flanges or if you want to give your existing pipe work lagging a further protection then we have a solution.
We can offer you quick and effective systems to make your repairs and prevent the costly requirement to replace and reinstall your pipe work systems.
Below 400mm - for leaking pipes (below 400mm) we offer single component bandages that can stop leakage in less than 30 minutes. They are quick and simple to use.
Above 400mm - for leaking pipes that are above 400mm we offer a two part systems that can offer a permanent repair in all size pipes.
For any further information please do not hesitate to contact us as we assure you that you will get your money’s worth by using this product!
Read the newsletter "MULTI METALL - Pipe Wrap" in pdf format
]]>We are pleased to inform you that PMS S.A. provides full technical support solutions for SULZER MARINE ENGINES, ranging from spare parts supply to on site repairing and overhauling.
We provide a various range of Spare Parts for following Engine types:
RD 68, RD 76, RD 90, RND 68, RND 76, RND 90, RND 68M, RND 76M, RND 90M, RTA 58, RTA 62, RTA 62U, RTA 68, RTA 76 and others...
Piston Rings
Cylinder Covers
Valve Seats & Valve Spindles
& various other spares
Gear wheels
Screws and bolts
Springs
Thermometers
Relief valves...
We also provide SERVICE ENGINEERS for Sulzer Marine Engines, who are ready to assist your vessel at short notice and at competitive prices.
We remain at your disposal for any information you may require.
]]>
Please feel free to contact us if you have any requirements for Liners, Nozzles, Plunger & Barrels, Filters, Bellows, Bushes...
Piraeus Marine Services S.A. is ready to assist your company at short notice and at competitive prices.
We remain at your disposal for any information you may require.
]]>
...and many more.
For any further information please feel free to contact us.
We remain at your disposal for any information you may require.
Read the newsletter "WARTSILA W20 6L20 - Spare Parts" in pdf format
]]>
We would like to inform you that PMS S.A. is in close cooperation with a Service Engineering Team for Cummins and Deutz Marine Diesel Engines.
They are highly qualified professionals with over 20 years of experience, dedicated and specialized in servicing Cummins - Deutz Marine Engines.
Our Service Engineers are ready to travel anywhere in the world at short notice to assist your company at low cost.
Please also note that we can provide GENUINE and OEM spare parts with fast delivery.
We remain at your disposal for any information you may require.
Read the newsletter "CUMMINS - DEUTZ - Service Engineers & Spare parts" in pdf format
]]>PMS Crew Department provides well-educated, highly qualified and experienced seafarers.
All our seafarers are holders of certificates in compliance with IMO, STCW’95 and USCG regulations and requirements.
Everyone is fully familiarized with:
Crewmembers are personally selected and prospective applicants carefully selected and prospective applicants carefully screened to verify their experience, competence, fitness and comprehension of English prior to enlistment. A policy of selective recruitment, together with continuous upgrade training and performance appraisal, guarantees quality manpower, proficiency and safety on board.
We remain at your disposal for any information you may require.
]]>
One Power Pack (Engine & Generator)
Power approx. 1000 KW
Engine Caterpillar 12V Cylinders
(requires overhaul)
DETAILS – CATERPILLAR
Cate 3512 STD
Fuel load RPM 1500
Fuel timing 87,2
On generator label
Cate 3512 STD
Power 1055 KW
Bare eng Hi Idle RPM 1525
Fuel load RPM 1500
One Power Pack (Engine & Generator)
Power approx. 400KW
Condition Moderate
Engine VOLVO TAD 1641
Generator LEROYA SOMER
60 HZ 440 V, Containerized
Please feel free to contact us in case of interest. We remain at your disposal for any further information and would be very pleased to assist you with any requirements you may have.
We remain at your disposal for any information you may require.
Read the newsletter "Caterpillar & VOLVO Power Packs EX Stock Piraeus" in pdf format
]]>Weishaupt burners in marine execution are reliable, safe, with economical operation, ease of installation and service friendly design. Its robust modular design allows utilization under the toughest conditions and adaptation to almost all requirements is possible.
Our Service Team consists of highly experienced professionals who are dedicated and specialized in Marine Burners. They are ready to travel anywhere in the world in order to assist your company at a short notice and at a low cost.
We remain at your disposal for any information you may require.
Read the newsletter "Weishaupt Marine Burners" in pdf format
]]>
Our PIELSTICK ENGINE specialist Service Engineer, Mr. Horst, a German citizen, stationed in Piraeus, is dedicated to servicing PIELSTICK engines. His vast experience includes:
Our company can provide new Pielstick Spare Parts mainly from Germany, UK and China, as well as second hand spares from our warehouse in Dubai.
Please do not hesitate to contact us as we would be pleased to assist you with any requirement you may have.
Read the newsletter "PIELSTICK Marine Engines | Spare Parts" in pdf format
]]>We would like to inform you that we have available for sale:
THREE UNITS OF HYDRAULIC MOTORS
MAKE: HYDROMATIK (REXTROTH)
TYPE: A2F225 W (126)
ONE UNIT HYDRAULIC PUMP
MAKE: HYDROMATIK
TYPE: A2V225 HW
All units can be fitted without alterations to HAGGLUNDS – TSUJI – LIEBHERR cranes.
We remain at your disposal for any information you may require.
Read the newsletter "Hagglunds - Tsuji - Liebherr | Crane Hydro Pumps" in pdf format.
]]>Specifically we can provide competitive prices for the following Engine parts:
Cylinder Liners (with class certificate)
Crankshafts
Pistons
Cylinder Covers
as well as Complete Engines
Please feel free to contact us if you have any requirements regarding Yanmar Marine Engine Spare Parts. PMS S.A. is ready to assist your company at short notice and at competitive prices.
We remain at your disposal for any information you may require.
Read the newsletter "YANMAR - Marine Engine Spare Parts" in pdf format
]]>Our hull cleaning station location is strategically close to anchorage area / roads PRAIA MOLE.
We attend afloat repairs in the major ports of the country such as:
Please do not hesitate to contact with us for any further repair assistance you may require for your vessels trading in Brazil.
We remain at your disposal for any information you may require.
Read the newsletter "Marine Services in Brazil" in pdf format
]]>We would like to inform you that PMS S.A. provides full technical support solutions for Heat Exchangers.
We can supply all major brands of plates and gaskets, with large stock in North Europe and Far East.
Plate Heat Exchangers Gaskets
for the following makes:
APV, AGC, Alfa Laval, Arsopi, Barriquand, Cetetherm, Ciat, Cipriani, Fischer, Fiorini, GEA, Hisaka, Mueller, Pasilac, Reheat, API Schmidt Bretten, Silkeborg, Sondex, Swep, Tetra Pak, Tranter, Vicarb etc...
Plate Heat Exchanger Maintenance: on site integrity tests regasketing and plate reconditioning for a complete overhaul of your equipment.
Please feel free to contact us if you have any requirements for Heat Exchangers.
PMS S.A. is ready to assist your company at short notice and at competitive prices.
We remain at your disposal for any information you may require.
]]>
Our repair team of experienced engineers provide service and maintenance works.
We remain at your disposal for any information you may require.
]]>
Our workshop team consists of highly experienced professionals who are dedicated and specialized in Exhaust Valve Spindle & Seat Recondition, as well as Piston Crown Reconditioning. They are ready to assist your company at a short notice and at competitive cost.
We remain at your disposal for any information you may require.
Read the newsletter "Exhaust-Valve Spindle & Seat Reconditioning" in pdf format
]]>Our team is recognized by all major classification societies for their high standards, executing the following underwater works with the highest quality as cost effectively and fast as possible for operators worldwide:
We perform many underwater works in S. America, Europe, Africa & Asia and offer a truly worldwide service in the following locations:
We remain at your disposal for any information you may require.
]]>Dear Sirs,
We would like to inform you that we have available for sale:
RUSTON 16RK270 CRANKSHAFT AND SPARE PARTS
MARKINGS
SU
LLOYDS STU 700030 E 381202
NK 1.87 CH . 107557 AJ I.C.T. 4163
80 311-01826-000
ENGINE NO 9757
Crankshaft can be delivered now immediately with hardness test and certificates.
We remain at your disposal for any information you may require.
Read the newsletter "RUSTON 16RK270 - Crankshaft & Spare Parts" in pdf format
]]>Our Company is proud to announce a very close cooperation with Sefine Shipyard, at your service for repair works with a new dry dock: 240 x 42 x 9 m, suitable for Handy, Handymax, Panamax and Aframax vessels.
Sefine was established in 2005 in a vast territorial area of 140.000 m2 in ALTINOVA/YALOVA, TURKEY and now holds a leading position as the new favourite destination of ship owners and shipping companies.
Ship Repair & Maintenance: Having the biggest dry dock in Altınova, SEFINE is ready for international competition for repair and reconstruction.
Services provided are:
Expecting repairs to become the yard’s mainstay of activities, Sefine could be looking to add a second-hand floating dock to its facility shortly. For further details please check www.sefine.com.tr.
We remain at your disposal for any information you may require.
]]>We would like to inform you that we have available for sale a PIELSTICK 18PC2-5V CRANKSHAFT, together with its Calibration Report which assures its good condition and quality.
The engine details are as follows for your kind consideration:
NKK SEMT PIELSTICK MAIN ENGINE
MODEL: 18 PC 2.5V
Type: 18 PC 2.5V
Rpm: 520
Mfg. No: 3075
CRANKSHAFT ONLY
USED, IN VERY GOOD CONDITION
MANUFACTURE DATE: 1999-1-21
STD SIZE AND COME OFF NEW.
PIELESTICK DIESEL ENGINE MODEL: 18 PC 2.5V
CRANKSHAFT CALIBRATION REPORT
CRANKPIN JOURNAL
Pin No. | FWD | AFT | ||
P/S | T/B | P/S | T/B | |
01 | 314.96 | 314.96 | 314.96 | 314.96 |
02 | 314.97 | 314.97 | 314.97 | 314.97 |
03 | 314.97 | 314.97 | 314.98 | 314.98 |
04 | 314.96 | 314.96 | 314.97 | 314.97 |
05 | 314.97 | 314.97 | 314.96 | 314.96 |
06 | 314.97 | 314.97 | 314.97 | 314.97 |
07 | 314.97 | 314.97 | 314.97 | 314.97 |
08 | 314.96 | 314.96 | 314.97 | 314.97 |
09 | 314.97 | 314.97 | 314.97 | 314.97 |
MAIN JOURNAL
Pin No. | FWD | AFT | ||
P/S | T/B | P/S | T/B | |
01 | 314.98 | 314.98 | 314.98 | 314.98 |
02 | 314.97 | 314.97 | 314.98 | 314.98 |
03 | 314.97 | 314.97 | 314.97 | 314.97 |
04 | 314.97 | 314.97 | 314.97 | 314.97 |
05 | 314.97 | 314.97 | 314.97 | 314.97 |
06 | 314.98 | 314.98 | 314.97 | 314.97 |
07 | 314.96 | 314.96 | 314.97 | 314.97 |
08 | 314.97 | 314.97 | 314.97 | 314.97 |
09 | 314.98 | 314.98 | 314.98 | 314.98 |
10 | 314.98 | 314.98 | 314.98 | 314.98 |
We are pleased to inform you that PMS S.A. can provide full technical support solutions for PIELSTICK MARINE ENGINES, ranging from spare parts supply, to on site repairing and overhauling.
We remain at your disposal for any information you may require.
Read the newsletter "PIELSTICK 18PC2-5V | Crankshaft" in pdf format
]]>Our PIELSTICK ENGINE specialist, Mr. Horst, a German citizen, stationed in Piraeus, is entirely dedicated in servicing PIELSTICK engines. His vast experience includes:
In addition, he is specialized in:
Our company can provide new Pielstick Spare Parts mainly from Germany, UK and China.
We remain at your disposal for any information you may require.
Read the newsletter "PIELSTICK Marine Engines | Service Engineers" in pdf format
]]>Our product is manufactured by a team of technically qualified, experienced and trained professionals who are specialized in production of any type of marine AVRs and are highly committed to the utmost satisfaction of customers.
We remain at your disposal for any information you may require.
Read the newsletter "Automatic Voltage Regulators - A.V.R." in pdf format
]]>Our company’s team of specialized and certified professionals can efficiently undertake the development of any QHSE relevant manual in order to enable the highest level of performance and regulatory compliance.
Namely, these manuals can be:
It is our firm belief that every system’s implementation should be closely monitored and examined. PMS team can provide a wide range of services that enable invaluable insight and feedback on critical areas of your organization both ashore and onboard.
Shortly, these can be:
Our team is committed not only to achieve compliance with all International Regulations, but focuses on providing the most applicable and easy-to-use solutions, minimizing, thus, all unnecessary paperwork.
We remain at your disposal for any information you may require.
Read the newsletter "Quality & Safety Services" in pdf format.
]]>
We are pleased to inform you that PMS S.A. can provide full technical support solutions for BOWTHRUSTERS, ranging from spare parts supply, to on site repairing and overhauling.
Our Service Team consists of highly experienced professionals who are dedicated and specialized in servicing Bowthrusters. They are ready to travel anywhere in the world, every day, around the clock, with low cost, to assist your company at a short notice.
Our Spare Parts Team can provide GENUINE and OEM spare parts with fast delivery and at competitive prices
We remain at your disposal for any information you may require.
]]>
We are very pleased to inform you that PMS S.A. can provide full technical support solutions for CONTROLLABLE PITCH PROPELLERS, ranging from spare parts supply, to on site repairing and overhauling.
Our Service Team consists of highly experienced professionals who are entirely dedicated and specialized in servicing Controllable Pitch Propellers. They are ready to travel anywhere in the world, every day, around the clock, with low cost, to assist your company at a short notice.
]]>Our Team can also perform repair works for the following:
Our Chinese ULTRASONIC TEAM can assist also in ships’ Dry Dockings. We cover all East and South coast of China.
Our Service Team consists of highly experienced professionals, specialized in Ship Repairs. They are ready to travel anywhere in China to assist your company at short notice and at a low cost.
We remain at your disposal for any information you may require.
Read the newsletter "Ship Repairs All Over China" in pdf format
]]>